[. . . ] Safety notices Intended purpose Description Items supplied Overview Technical data Placing furniture on the roller bases Shunting furniture Removing the roller bases Troubleshooting Cleaning Storage Disposal Importer/Service Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. [. . . ] Subsequently, you can shunt the furniture over short distances with a minimum of effort. Immediately after unpacking check to ensure that all components are available and that there are no signs of visible damage to the furniture transport set: · 1 Lever arm with swivelling head · Remove the contents from furniture pieces before lifting and shunting them. Always slide the swivel head of the lever arm under the furniture to the stop plate. Ensure that there is sufficient space available to To avoid an irregular elevation, always place the lever arm in the middle of the side to be lifted. at the hand grip · With this you will require the least effort. Push the swivelling head ´ of the lever arm under the furniture and in the middle of it (A). To lower the furniture piece onto the roller base Repeat the above procedure for the opposite The roller bases are each fitted with a rotatable loading surface ¿. With these you can subsequently adjust the roller bases under the furniture piece. [. . . ] Dispose of the appliance through an approved disposal centre or at your community waste facility. [. . . ]